BOZHAN SANITARY

case
What is the benefit of using a faucet aerator


What is the benefit of using a faucet aerator?

 
A faucet aerator  are  on indoor water fixtures and create a stream with little to no splash. These are  also  used  to  shape the stream of water
escaping the spout. It also reduces the noise the faucet’s running water makes and increases the water pressure.
The faucet aerator has three
main components and is located  at  the faucet’s  end (where the water comes out). 
These components are the housing, a rubber washer and
a  mesh insert. The mesh does the most work by  using  holes to  restrict water flow  with  pockets  of air. 
This  helps create a more consistent
water  pressure  and  uses  less water. As the name implies, air is introduced into water,  like the origin of the word aerate. 
The  many  smaller
streams created offer consistency in flow and pressure 
by preventing a heavy stream from barreling out of the spout. 
 
The benefits of getting aerators for your faucets are:
 - Savings on money and water 
- No more splashing 
- Less noise
- No more dirt and debris 
 
Not  only do aerators  control the stream, but they also serve  as a filter for debris  that  can  come through the  faucet. This will build up, so it’s
important  to  remove and  clean  it every so often. 
 It’s really easy to do so--simply unscrew the aerator from your faucet. This should be pretty
easy,  but  if  it’s  on there tight, you can use a spanner.  
Once you’ve   done that, remove  the washer from the inside/top of it  and  gently push
out the mesh insert. Run the filter insert through water to clean it and, if need be, use a pin to get any debris that is still stuck. 
 A mix of vinegar
and water can also give it a good cleaning.Put the aerator back together the same way you took it apart and attach it to the faucet.
If something
is permanently wrong with your aerator, most models will come with a warranty. It’s important to choose the right one for your faucet in the first
place. 
Most importantly, check out the type of threading you’ll  be attaching it to. Female  threads are on the interior of  the spout edge  and the
male threads are visible on the outer edge of the spout. 
 
For a female threaded faucet, you’ll need a male threaded aerator. For a  male threaded faucet,  you’ll  need a female threaded aerator.Typical
sizes are 15/16”and 55/64” for male and female, respectively.Junior sizes are 13/16” male and ¾” female.Sizes that aren’t standard will require
an  adapter  to  change your faucet’s threading  or size. 
The most basic design screws onto the  end  of  your faucet and gives you the aerated
results you need.
Others will be a swivel so you can choose and move the direction of the stream, and some even have multiple stream options.  
Diverter-style  aerators  allow  for use of  countertop filters along with the attachment to the  faucet. To get a true aerated effect, the attachment
should not create a spray or laminar stream of water, only the white-ish, soft stream. 

If you need further information,please check our website:https://www.bzsanitary.com
E-mail:bzsanitary@gmail.com  bozhanfaucet@gmail.com
Skype:maryzheng2331  Whatsapp:008613777680982

© 2019 Bozhan Sanitary Technology Co., Ltd. All Rights Reserved.    POWERED BY UEESHOP